Brush Master CH2 Manuel du propriétaire télécharger pdf (Page 13)

Rev: 07/2010 Brush Master™ Chipper/Shredder with 2-Way Feed

Heavy Duty Power Equipment

Maintenance and Storage

Item

Before each

use

20 hrs or

every 3

months

50 hrs or

every 3

months

100 hrs or

every 6

months

300 hrs or

every 1

year

Engine Oil (Check) X

Engine Oil (Change) X

Air Cleaner (Check) X

Air Cleaner Wash X

Fuel filter Cup (Clean) X

Spark Plug (Clean) X

Spark Plug (Change) X

Lubricate Release Bracket X

Lubricate Hopper Assembly X

Check Chipper Blade X

Fuel Tank and Filter (Clean) X

Maintenance Schedule

Always stop engine, disconnect spark plug, and

ground against engine before cleaning,

lubricating or doing any kind of maintenance on

your machine.

Maintenance and Storage

1. Never tamper with safety devices. Check their proper

operation regularly.

2. Check bolts and screws for proper tightness at

frequent intervals to keep the machine in safe working

condition. Also, visually inspect machine for any

damage and repair, if needed.

3. Before cleaning, repairing, or inspecting, stop the

engine and make certain the impeller and all moving

parts have stopped. Disconnect the spark plug wire

and ground it against the engine to prevent

unintended starting.

4. Do not change the engine governor settings or

overspeed the engine. The governor controls the

maximum safe operating speed of the engine.

5. Maintain or replace safety and instruction labels, as

necessary.

WARNING

6. Follow this manual for safe loading, unloading,

transporting, and storage of this machine.

7. Never store the machine or fuel container inside

where there is an open flame, spark or pilot light such

as a water heater, furnace, clothes dryer, etc.

8. Always refer to the operator’s manual for proper

instructions on off-season storage.

9. If the fuel tank has to be drained, do this outdoors.

10. Observe proper disposal laws and regulations for

gas, oil, etc. to protect the environment.

If the Chipper Becomes Clogged:

If the discharge area becomes clogged:

 Stop the engine. Disconnect spark plug wire from

spark plug and ground against the engine.

 Remove the large funnel and the clean out the

access hatch on the side of the chipper engine box

(as necessary).

 Reach in and clear the debris causing the blockage.

Reinstall the funnel and the clean out access hatch.

 Connect the spark plug wire and restart.

NOTE: If the blockage is severe, the hammer screen

within the discharge chute can be removed as well,

providing greater access. To accomplish this, remove the

pins and slide the flail screen out of the discharge chute.

1 2 ... 8 9 10 11 12 13 14 15 16 17

Commentaires sur ces manuels

Pas de commentaire

Brush Master CH2 Manuel du propriétaire Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Broyeurs pour jardin Brush Master CH2